Surface engineering combines methods for directional changes of physical and chemical properties of the material surface layers by deformation, modification, deposition of films, coatings, protective layers using various combined methods
New materials are composite materials such as carbon fiber reinforced plastic, glass-fiber reinforced plastic, basalt fiber reinforced polymers, aramid plastic and metal composites, high-tech ceramics – aluminum, zirconia, oxide, nitride, carbide ceramics and others, new construction materials – new insulating materials from foam glass, modifying agents of roadway surfacing based on rubber powder or polymer fibers, new concrete types. The application range of new materials is the widest – space and aircraft industry, construction engineering, medicine, protection and safety
The technology implies changing the shape and dimensions of billets due to the effect of applied forces with a subsequent result saving. The shape and dimensions of the product do not change after the pressure loss. In order to increase the plasticity, metal is heated to the specific temperature before the beginning of the treatment. The temperature is determined individually for each type of the material depending on its specific physical and chemical characteristics
Depending on the requirements made to operational characteristics of parts, there are three types of coatings
Casting production is a field of mechanical engineering which deals with formed parts and billets by pouring the molten metal into the moulds where their cavity have the configuration of required parts
In the casting process, metal solidifies in the mould during the cooling process obtaining a casting mold – a finished part or a billet which can be mechanically treated if it is necessary (increase of the dimension accuracy and roughness reduction). In this respect, the casting production has the task to obtain casting moulds where the dimensions and the shape are as close as possible to the dimensions and the shape of the finished part. From 50% to 95% of all parts in machines and industrial equipment are manufactured by casting into moulds
On June 4, 2021, PTI NAS of Belarus hosted the delegation from the Joint Institute for Nuclear Research (Dubna, Russia).
Within the meeting, the negotiations between the administrations of PTI NAS of Belarus, NAS of Belarus and JINR were held.
Sides discussed the intermediate results of the joint project between PTI NAS of Belarus and JINR on the development and production of superconductive resonator prototypes obtained by electron-beam welding and impact hydroforming methods.